在進行復合材料保溫板的鋪貼裝修的時候，是需要了解到正規的施工流程才可以的，對于貼保溫板外墻施工工序是需要知道的，而且有關外墻保溫板施工注意事項也要掌握，下面來講講吧。

During the paving and decoration of composite insulation board, it is necessary to understand the formal construction process. For the construction process of external wall with insulation board, it is necessary to know, and the precautions for the construction of external wall insulation board should also be mastered. Let's talk about it next.

基層檢查————基層墻體空鼓、脫落及找平處理————彈基準線和分割————清理墻體灰塵及調配貼板粘結砂漿————粘貼無機樹脂保溫裝飾一體化成品板用錨固件將無機樹脂保溫裝飾一體化板錨固于墻面————用泡沫條填縫————板縫隙清理一——貼美紋紙膠帶一——灌注密封膠————安裝防水透氣裝置————撕去美紋紙和表面保護膜————清潔面板。

Inspection of base course -- hollowing of base course wall Peeling and leveling treatment -- snapping the datum line and dividing -- cleaning up the dust of the wall and mixing the bonding mortar of the veneer -- pasting the inorganic resin insulation and decoration integrated finished board and anchoring the inorganic resin insulation and decoration integrated board to the wall with anchors -- filling the seams with foam strips -- cleaning the seams of the board -- pasting masking tape -- pouring sealant -- installing waterproof and breathable devices -- tearing it off Masking paper and surface protective film -- clean the panel.

外墻保溫板施工注意事項

Precautions for construction of external wall insulation board

1、材料應分類掛牌存放。聚苯板應成捆立放，防雨防潮。網格布也要防雨存放。粘結、抹面砂漿存放也要注意防雨防潮和保質期。

1. Materials shall be classified and stored with tags. The polystyrene board shall be placed vertically in bundles to prevent rain and moisture. The mesh cloth should also be stored in rain proof conditions. The storage of bonding and plastering mortar should also pay attention to rain and moisture resistance and shelf life.

2、操作地點環境和基層溫度不低于5℃。風力大于5級或雨天不能施工。若在外墻保溫施工時突然降雨，應采取有效措施，以防雨水沖刷墻面。

2. The ambient and base temperature of the operation site shall not be lower than 5 ℃. Construction cannot be carried out in rainy days when the wind force is greater than 5. In case of sudden rainfall during external wall insulation construction, effective measures shall be taken to prevent rainwater from scouring the wall.

3、板與板的板縫拼嚴，縫寬超出2mm時，用相應厚度的聚苯板片塞平。

3. The seam between plates shall be tightly jointed. When the seam width exceeds 2mm, the polystyrene plate with corresponding thickness shall be used to plug it.

4、外墻保溫施工完成后，后續工序與其他正進行的工序應注意對外墻保溫系統成品的保護。

4. After the external wall insulation construction is completed, the subsequent processes and other ongoing processes should pay attention to the protection of the finished products of the external wall insulation system.

5、山東擠塑板廠家認為您應該嚴格遵守有關安全操作規程，實現安全生產和文明施工。

5. Shandong extruded board manufacturers believe that you should strictly abide by the relevant safety operation procedures to achieve safe production and civilized construction.

在此提醒您，施工時應合理安排整個工程的施工程序，避免后續工程對復合板造成損壞或污染。保溫板施工前應做出樣板，經建設、設計、監理等單位確認后，方可施工。更多關于材料的問題就來網站http://www.jommz.com多關注咨詢！

I would like to remind you that the construction procedure of the whole project should be reasonably arranged during construction to avoid damage or pollution to the composite board caused by subsequent works. The sample plate shall be made before the construction of insulation board, and the construction can be carried out only after it is confirmed by the construction, design, supervision and other units. For more questions about materials, please visit the website http://www.jommz.com Pay more attention to consultation!